iPhone Touch Screen Not Working – Problem and Solution

iPhone Touchscreen Not Working Problem and Solution. Learn how to Fix.

iPhone Touch Screen Not Working Properly or in Unresponsive – Here we will learn how to fix this problem with proven solution. These solution is applicable to all models of the Apple iPhone – iPhone 10, iPhone 9, iPhone 8, iPhone 7, 6, 5, 5S, 4,  4S, iPhone 3G and all other models.

iPhone Touchscreen Not Working

iPhone Touch Screen Not Working Properly

iPhone touchscreen not working properly or is unresponsive is a common problem. The touchscreen problem can occur in any model of the iPhone. However, solution to the problem is easy. If you have little DIY experience in assemble and disassemble (opening) any mobile phone then you can easily solve this touchscreen issue in its any version. All you need are some Mobile Phone Repairing Tools.

All models of iPhone till now have a separate IC called “Touchscreen Controller” to handle the job. However, Part Number of the IC in different Models of iPhone is different but their location on the Logic Board and Function is same.

Here I explain step-by-step easy to understand process on how to solve iPhone touchscreen not working properly problem. The same solution applies to all models of iPhone including – Original iPhone, iPhone 6, iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G.

iPhone Touch Screen Not Working Properly or is Unresponsive – Problem and Solution

  1. Using precision screwdriver, carefully remove all the screws from the housing of the iPhone and keep them at a safe place.
  2. Remove all the screws from inside and carefully disassemble all the inside parts until you reach the Logic Board of the iPhone. Remember the sequence of disassembly. This will be helpful when you assemble back the iPhone.
  3. When you look at the Logic Board of the iPhone, you will see an IC similar to the image above. Remember, different models of the iPhone will have different part numbers on the Touchscreen Controller IC. For e.g., the Part Number of iPhone 4S Touchscreen Controller IC is – TI 343S0538.
  4. Dry solder could be one reason for the touchscreen problem. Using ESD-Safe Brush, apply good quality no-clean flux on all sides of this particular IC.
  5. Using Hot Air Blower, give hot air all around the IC. Make sure to give hot air from some height. If you give hot air from too close then the solder can melt. Our motive is to not to melt the solder but to remove all the oxides from the solder joints.
  6. Now using any good PCB cleaning chemical like IPA solution, clean the logic board with the help of ESD-Safe Brush.
  7. Assemble back the iPhone and check the touchscreen. It should work now.
  8. If the problem is not solved then you may have to replace the Touchscreen Controller IC (SMD).

iPhone Touchscreen FAQs

There are several steps you can take to try and fix your iPhone touch screen. First, try restarting your device. If that doesn't work, try resetting your device's settings or restoring it to factory settings. You can also try cleaning the screen or removing any protective case or screen protector that may be interfering with the touch sensor.

If your iPhone touch screen is still not working after trying the above steps, it may be time to take it to a professional for repair. Apple offers repair services for iPhones, or you can take it to a reputable third-party repair shop.

The cost of repairing an iPhone touch screen varies depending on the model of your iPhone and the extent of the damage. In general, Apple charges between $129 and $329 for screen repairs, depending on the model of the iPhone.

To prevent your iPhone touch screen from not working, make sure to keep your device updated with the latest software updates. You should also avoid exposing your device to extreme temperatures or moisture, and use a protective case and screen protector to prevent damage to the screen.

Related Posts:

Share This:

Santosh Das

Santosh is an Electronics Geek, Blogger, Young Entrepreneur and Founder of this Mobile Phone Repairing Website. Santosh possesses vast experience in the field of electronics, telecommunication, Soldering, SMT, ESD Safety, Keep visiting for daily dose of Tips and Tutorials.

Also Read:

15 Responses

  1. Ramesh says:

    Mera redme_6display chod raha hai kaise kare

  2. Ernest McCauley says:

    Thanks ever so much for these brilliant lectures. You’ve built my confidence and I’m more excited to enroll into an institution to practicalize my desire.

  3. Rony andriyanto says:

    My phone’s touchscreen not working all. Often from top to middle of the touchscreen not work normally. Please help me for the solution.

  4. patrick says:

    what does jumper in cell phone means. please i will be so glad if you will help with this.

  5. Vladimir Aksyonov says:

    This is really nice information and everything is explained in steps, which really helpful for me. This a common problem and here I can find the solution of this, If you want to buy a new touchscreen then Phone Repair Parts will be the best option from where you can buy it at an affordable cost.

  6. jawidshahzad says:

    Please tell me about Android Programing

  7. Adetoyese Adebayo. says:

    I am very much happy with your free posts on mobile cell phone repairing. As a beginer is just like am reading the theory part of the field. I prayed for direct reward from GOD for your remuneration.
    Thanks,
    Adetoyese Adebayo.

  8. Bikash Neopane says:

    I phone 5 display problem

  9. ephraim says:

    i need to repair my galaxy s2 network problem jumper i need a help pls

  10. Sumit Bhardwaj says:

    Sir iphone5 water demeg tuch not working

  11. Elias says:

    Thanks for your support

Leave a Reply