Hot Air Blower for Mobile Phone Repairing
Hot Air Blower for Mobile Phone Repairing. Also Called SMD Hot Air Gun / SMD Rework Station.
Hot Air Blower for Mobile Phone Repairing is a Very Important and Useful Tool for any Technician. This Machine is also known as SMD Hot Air Gun and SMD Rework Station. Some of these Machine also include Feature for both SMD and BGA Rework and Repairing. Let us Discuss and Understand this Hot SMD Rework Station in some Detail.
What is Hot Air Blower Machine
Hot Air Blower or SMD Hot Air Gun or SMD Rework Station is a Machine or tool or equipment that blows hot air for Desoldering (Removing) and Soldering of SMD Electronic Components (Surface Mount Devices or Electronic Components) or IC from the PCB of a Mobile Cell Phone or any other PCB.
It is also called SMD Rework Station and SMD Hot Air Gun. It has control to Regulate or Control Temperature and Flow of Hot Air. Temperature settings generally range from 200 to 500 Degree Celsius.
How Does a Hot Air Blower Machine Work?
A hot air blower machine is divided into 2 parts – A Station with all the controls to set Temperature and Air Flow and a Hand Piece for Heater or Heating Coil to Release Hot Air. There is a heating element or heater coil (generally made up of ceramic) inside the hand piece. Cold air flows from the station to the hand piece and when this cold air comes in contact with the Heater or Coil, the air gets hot depending on the Temperature Setting and Hot Air Blows Out.
How to Use Hot Air Blower for Mobile Phone Repairing for Desoldering and Soldering
Here are the step-by-step instructions to use a Hot Air SMD Rework Station to properly remove any IC from any Type of PCB and solder:
- Set the temperature and air flow at the required setting. Make sure the temperature is neither too high nor too low. A temperature of 400 Degree Celsius is good for most soldering and desoldering work. Also make sure that the air flow setting matches the temperature setting. Proper air and temperature settings are mentioned in the manual of the machine.
- Identify the faulty IC and gradually give hot air to the component. Start by giving heat from some height and then gradually decrease the height. This will prevent the PCB and other electronic components from getting damaged due to thermal shock.
- When the solder paste is melted, remove the faulty IC using a Tweezers or IC Pick Up Tool.
- Clean the track properly. Use desoldering braid if required to remove all the solder paste from the track.
- Dispense fresh solder paste on the track and place the NEW IC.
- Give heat starting from some height and gradually decreasing the height of the hand piece of the hot air blower.
- When the solder is melted, remove the blower and the NEW IC is soldered.
Tips: Apply good quality NO-Clean Liquid Flux before desoldering and soldering.
Best Hot Air Blower for Mobile Phone Repairing
There are many manufacturers, exporters and suppliers of Hot Air Blower Machine. Well known among them are:
Many Chinese companies also manufacture and sell cheap hot air blower machines but they compromise with quality. I trust Goot (Japanese Brand), Yihua (Model 858D) and Quick (Model 858D).
Video: How to Remove IC with SMD Hot Air Gun
Hot Air Blower FAQs
What should I look for when buying a hot air blower for mobile phone repairing?
When buying a hot air blower for mobile phone repairing, you should look for a model with adjustable temperature control and airflow. This will allow you to customize the temperature and airflow to match the specific needs of each component. You should also look for a blower with a compact design, comfortable grip, and a stable base for safety and convenience.
Can I use a hairdryer instead of a hot air blower for mobile phone repairing?
No, you should not use a hairdryer instead of a hot air blower for mobile phone repairing. A hairdryer does not have the precision, control, or temperature range needed for mobile phone repairing, and may damage or overheat the components. It is important to use a specialized hot air blower designed specifically for electronic repair work.
How do I use a hot air blower for mobile phone repairing?
To use a hot air blower for mobile phone repairing, first select the appropriate temperature and airflow settings for the component you are working on. Then, hold the blower at a safe distance from the component and slowly move it around in a circular motion, heating the area evenly until the solder melts. Once the component is loose, use tweezers or a prying tool to remove or reattach it.
How do I maintain and store my hot air blower?
To maintain and store your hot air blower, make sure to clean the nozzle and filter regularly to prevent dust and debris buildup. Store the blower in a cool, dry place away from moisture and direct sunlight. When not in use, make sure to unplug it and wrap the cord neatly to avoid tangling.
Related Posts:
- Buy Mobile Phone Repairing Tools Online
- Mobile Phone Repairing Tools
- 10 Must-Have Tools for Mobile Phone Repair
- Mobile Phone Repair Kit
- Soldering Iron and Soldering Station for Mobile Phone Repairing
- PCB Holder / PCB Stand for Mobile Cell Phone Repairing
- Solder Wire for Mobile Phone Repairing
- Thinner / PCB Cleaner / IPA for Mobile Phone Repairing
- Jumper Wire for Mobile Phone Repairing
- Precision Screwdriver T4, T5, T6 for Mobile Phone Repairing
- Hot Air Station for Mobile Phone Repairing
- Best Mini Soldering Station in India for Mobile Phone Repairing
I need air blower
Nice
Sir we need to all types of mobile repairing tools for professional work please price list and products details send own my e-mail
Please visit http://www.pcbatools.com and send an Enquiry.
Whats alternative blower to be used to open phone cases ?
There are small Potable Blowers available in the Market.
I need phone tools. How do I apply for it?
Get all tools from PCBA Tools
I like these tools. And am interested in them.
Get all Tools from PCBA Tools
Am Syawbean from Ghana
Can you please give me sources for buying this tools I want to open a mobile repairing shop
You can Buy these Tools from PCBA Tools. Just search on Google and You will find at TOP.
Plz is it soldering n dissoldering can the bower do in phone repairs?
Yes, a blower can do both soldering and desoldering if you use solder paste.
Sir which is best and cheap blower
You can go for Soldron 878D
can u please get me the Gas blower type?
Buy the Baku Brand. It is economical and good.
plz you contact no send me sir
You can contact me on the contact page.
how much for this equipment…
It will cost you from Rs. 1000 to Rs. 80,000/- It depends which brand and model you select to buy.